Home | Water Heaters | Heat Pump Water Heaters | Heat Pump Water Heater Buyers Guide

LOCAL. TRUSTED. FAST.

Call (425) 636-7038
for fast service

Heat Pump Water Heater Buyers Guide

WHAT IS A HEAT PUMP WATER HEATER?

Most homeowners are familiar with heat pump technology as it applies to heating and cooling your home. A heat pump water heater uses the same technology to heat water, resulting in efficiency 2-3 times than that of a standard electric water heater. Heat pump water heaters on the market today include a storage tank, a compressor and fan all in one unit, and while they are more expensive, many utility companies offer incentives that dramatically bring down the cost of the unit and installation.

HOW DOES IT WORK?

A heat pump water heater works like a refrigerator in reverse. Instead of using a compressor to pull heat from inside the refrigerator and transferring it to the surrounding room, a heat pump uses the compressor to take heat from the surrounding air and transfers it inside a storage tank, where your water is heated.

Most heat pump water heaters also have backup resistance elements – like a standard water heater – for situations when the ambient temperature in the room is not high enough. For most efficient operation, most heat pump water heaters are suited for a year-round temperature range of 40 – 90 degrees F.

For northern regions that have slightly colder temperatures, we recommend using the Northwest Energy Efficiency Alliance’s (NEEA) Northern Climate Qualified Heat Pump Water Heaters list as a guide to choosing a heat pump water heater that will suit your needs.

SELECTING A HEAT PUMP WATER HEATER

When selecting a heat pump water heater, you should consider the following:

  1. What size and first hour rating do I need?
    Consider the number of bedrooms and bathrooms you have in your house, and ask your installing contractor to suggest a size that will fit your needs. Most heat pump water heaters will have a capacity of 50, 66, or 80 gallons, and the first hour rating – a measurement of how much hot water the heater will put out in an hour of operation – will only be slightly higher than the capacity, because the heat pump heating process is fairly slow.
  2. What space constraints do I have?
    As heat pump water heaters are often taller and wider than the current model in your home, you need to consider the space available for a larger unit. Ask your installer to guide you through the process to determine if you have enough space to have the unit installed and to service the air filter.
  3. What should I look for in an Efficiency Factor (EF)?
    The higher the EF, the lower the operating costs. The best heat pump water heaters have an EF of 2.0, which means that they are 200% efficient. While that might sound strange, the EF is comparing the amount of hot water produced per unit of electricity consumed in a typical day, so 200% efficiency means the heat energy produced is twice the amount of electricity consumed.
  4. What brand should I select?
    Some important things to consider when choosing the brand of your heat pump water heater are warranty, availability of local service providers, and reliability. The best heat pump water heaters on the market have a lifetime warranty on the tanks, which are constructed with stainless steel.

    Make sure there are installers in your area who are certified to work on this product, in case you need to have your water heater serviced. Also, read up on what others who have bought the brands you have in mind have to say about their water heaters’ reliability.

WHAT REBATES ARE AVAILABLE FOR HEAT PUMP WATER HEATERS?

Many utility companies offer significant incentives to help bring down the upfront cost of purchasing and installing a heat pump water heater. Call your utility company to find out about incentives available in your area.

WHY CHOOSE A HEAT PUMP WATER HEATER?

A heat pump water heater is a great solution for a homeowner who currently has a standard tank electric water heater, and is looking to replace it either because their current tank is old, inefficient, and/or leaking, or because they simply want to reduce their annual electric bill. While the average home using a standard electric tank water heater spends roughly $500 heating their water each year, a heat pump water heater will reduce annual costs by $250 to $300.

Whether you’re concerned about environmental impact or just bringing down the cost of heating your water, a heat pump water heater is a winner in both of these categories. Plus, with significant incentives offered from major utilities on the west coast, the cost of purchasing and installing a heat pump water heater is, in some cases, less than installing a new standard electric tank water heater.

WHAT ARE SOME ADVANTAGES OF A HEAT PUMP WATER HEATER?

It’s important to consider some of the positives and negatives of choosing a heat pump water heater. Here are some that stand out:

Advantages

  • Reduces electricity bills by $200-300 annually
  • Purchase & installation w/ incentives can be less than cost of standard tank installation
  • Some tanks are stainless steel, w/ a lifetime warranty
  • Digital controls let you set operation of the heater according to your preference of efficiency vs. quick recovery
  • Ideal for a garage or other un-conditioned space

Disadvantages

  • Most units are large, requiring possible plumbing and installation modifications
  • If installed in a basement, the unit requires a condensate line pump
  • Heat pump water heaters require the air filter to be changed every 1-2 years
  • About as loud as a dishwasher and may not be ideal when installed next to a bedroom or other living space

INSTALLING AND MAINTAINING A HEAT PUMP WATER HEATER

The first three things you should consider when choosing to install a heat pump water heater are fuel type, location, and electrical capacity in your home.

Fuel Type – If you currently have a gas water heater, most installers and utility companies will recommend sticking with gas. Even though heat pump water heaters achieve impressive efficiency ratings, the cost of operating a heat pump water heater is still in most cases more than the cost of operating a gas water heater. And after considering generation and line losses with electricity, using gas to heat your water from an overall cost and environmental perspective.

Location – Most incentives are only provided when the heat pump water heater is located in a garage or other un-heated, un-conditioned space. HPWHs generally require installation in a room with 1,000 cubic feet of space so that enough ambient air is available for the water heater to operate efficiently. If you need to relocate your water heating system to accommodate this, ask your installer for to let you know what would be involved.

Electrical – Most heat pump water heaters require a 30 amp breaker and a 10 gage wire. If you have questions about your electrical, ask your installing contractor to walk you through how to check this. In some cases, you may need to have an electrician make some modifications before you can install the HPWH.

When estimating a total cost for the installation of a heat pump water heater, your installer should go over the current plumbing codes and permit costs with you before they begin work in your home. Make sure you understand the requirements so that your water heater is installed safely.

Also ask your installer to help you understand the periodic maintenance requirements of a heat pump water heater. While maintenance costs are low, it is important that you clean your air filter periodically to extend the life of your heat pump. Read your owner’s manual for further tips and recommendations.

give us a call to talk water heaters!
(866) 941-8569

Installation Services For Heat Pumps

Water Heater Installation Services in Pacific Northwest

Your Local Expertise for Home Comfort: Looking for a ‘water heater installation service near me’ in the Pacific Northwest? Our service specializes in installing high-quality water heaters, including top brands like Rheem, Bradford White, and Rinnai.

Key Features of Our Service in Pacific Northwest:

Premium Brand Selection:

    • We carry leading brands like Rheem, Bradford White, and Rinnai, ensuring you have access to the best ‘water heater installs’ in the market.
    • Whether you’re seeking energy efficiency, longevity, or specific heating capacities, we have the right solution for your San Francisco home.

Certified Installation Technicians:

    • Our team, renowned for ‘water heater installation service in San Francisco’s, comprises professionals expertly trained in installing these top brands.
    • Each installation complies with California Bay Area’s rigorous codes and safety standards.

Tailored Solutions for Pacific Northwest Residents:

    • Our ‘water heater installation’ consultations are designed to understand your specific needs in Pacific Northwest, recommending the perfect fit from Rheem, Bradford White, or Rinnai.
    • Focused on delivering customized solutions that align with your household’s water usage and energy preferences.

Safety and Compliance Priority:

    • We ensure that each ‘water heater install’ adheres to Pacific Northwest safety regulations, including the necessary safety features and compliance protocols.
    • Continuous training keeps our team updated with the latest local standards.

Efficient and Timely Installation Services:

    • Known for our ‘water heater installation service near me’, we offer prompt installations to minimize disruption to your daily life.
    • Striving for same-day service to ensure your San Francisco home has hot water without delay.

Comprehensive After-Installation Support:

    • Our commitment extends beyond installation, with dedicated after-service support for Rheem, Bradford White, and Rinnai units in Pacific Northwest.
    • Prompt emergency repair services to address any post-installation needs.

Transparent and Fair Pricing:

    • Receive a clear, upfront cost for your ‘water heater installation in San Francisco, with no hidden fees.
    • We pride ourselves on honest pricing that reflects our commitment to quality and customer satisfaction.

Choose Local for Your Pacific Northwest Home: Embrace the comfort and efficiency of top brands like Rheem, Bradford White, and Rinnai with our specialized installation services. We’re here to ensure your Pacific Northwest home enjoys the best in water heating technology.

give us a call to talk water heaters!
(425) 636 – 7038

Heat Pump Water Heater Codes and Regulations

Mandatory Permits In Pacific Northwest

Replacing your water heater? Most PNW laws require a permit. But don’t worry, we handle the permit process efficiently, avoiding any project delays.

      Up-to-Date Code Knowledge

      Our experts stay informed about the ever-changing water heater codes in PNW, ensuring your installation is safe and compliant.

      Safety-First Approach

      We prioritize safety, adhering to codes and regulations. Our technicians will walk you through the necessary safety checks before starting work.

      Water Heater Codes Currently Enforced in pnw

      Approved Location for Safety:

        • Restricted Areas: Water heaters should not be installed in bedrooms, bathrooms, or closets used for other purposes.
        • Safety Rationale: This is to reduce the risk of accidents and limit exposure to Carbon Monoxide (CO) emissions from gas water heater vents.

      Earthquake Safety with Straps:

        • Requirement in Earthquake Zones: California law mandates earthquake straps on water heaters.
        • Strap Placement: They must be positioned on the top and bottom thirds of the water tank.

      Venting for Gas Combustion Water Heaters:

        • Preventing CO Hazards: Proper venting is critical to avoid Carbon Monoxide build-up.
        • Material and Clearance Standards: The vent should be of appropriate material and maintain safe clearance from combustible materials.

      Pans and Drains to Mitigate Leak Risks:

        • Installation Criteria: If there’s a potential for water damage from leaks, a pan with an external drain line is required.
        • Code Adherence: This follows California’s plumbing code.

      Pressure and Temperature Relief Drain (P&T Drain):

        • Outdoor Drainage Mandate: P&T drains should be directed outside to reduce the risk of scalding.
        • Alternatives for Specific Situations: In some cases, alternative solutions like a Watts 210 valve are acceptable.

      Dedicated Water Shutoff:

        • Uninterrupted Water Supply During Maintenance: A dedicated shutoff is necessary to ensure the rest of the house has water during tank servicing.

      Pipe Insulation in Unconditioned Spaces:

        • Mandatory Insulation: Insulating exposed pipes is enforced to prevent energy loss.

      Safety Bonding for Pipes:

        • Grounding Requirement: Gas and water pipes must be grounded to avoid electrical risks, particularly near electrical wiring.

      Tell us about it!

      Fill out the form or send us an email and one of our experts will get back to you within 15 minutes during business hours!

      "*" indicates required fields

      This field is for validation purposes and should be left unchanged.

      Our Hours

      MON-FRI 7:00AM – 7:00PM
      SAT-SUN 8:00AM – 5:00PM

      FOLLOW US